Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002 |
 |
Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002
Part #: PS6480 Our Price: $1,850.00
 |
| Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002. Supports 350 - 575hp and can be upgraded for a new Dodge. 64mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Super Phat shaft 66 for the Dodge Cummins 12/24 Valve 1994-2002 |
|
Super Phat shaft 66 for the Dodge Cummins 12/24 Valve 1994-2002
Part #: SPS6680 Our Price: $2,200.00
|
Super Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 400 - 750hp and can be upgraded into a twin setup. 66mm extended tip compressor inside a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft.
NOTE: The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions. |
|
| 24V SHO Race Pump |
 |
24V SHO Race Pump
Part #: DPDSHOVP Our Price: $1,750.00
|
Super High Output VP44
Modified Bosch VP44 pump for high performance use. High flow capacity for race and competition applications.
High capacity feed fuel system such as the FASS is highly recommended.
There is a $400.00 core charge on this item. |
|
| 12V SHO Race Pump |
 |
12V SHO Race Pump
Part #: DPDSHOP Our Price: $3,100.00
|
Super High Output P7100
Modified Bosch P7100 pump for high performance use. High flow capacity for race and competition applications.
High capacity feed fuel system such as the FASS is highly recommended.
There is a $1000.00 core charge on this item. |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Super Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 20 |
|
Super Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 20
Part #: SPS6680CR Our Price: $2,200.00
|
Super Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 400 - 700hp and can be upgraded into a twin setup. 66mm extended tip compressor inside a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmission
NOTE: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions. |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Phat shaft 62 for the Dodge Cummins 12 Valve 1994 to 1998 |
|
Phat shaft 62 for the Dodge Cummins 12 Valve 1994 to 1998
Part #: PS6270 Our Price: $1,550.00
|
| Phat shaft 62 for the Dodge Cummins 12 Valve 1994 to 1998. Supports 332 - 550hp and can be upgraded to 64 or for a new Dodge 62mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for longer life. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation.... |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Phat shaft 62 for the Dodge Cummins 24 Valve 2nd Gen. 94-98 |
|
Phat shaft 62 for the Dodge Cummins 24 Valve 2nd Gen. 94-98
Part #: PS628024 Our Price: $1,550.00
|
| Phat shaft 62 for the Dodge Cummins 24 Valve 1998.5 to 2002. Supports 325 - 550hp and can be upgraded to 64 or for a new Dodge 62mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation.... |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Phat shaft 62 for the Dodge Cummins 24 Valve CR 2003 to 2006 |
|
Phat shaft 62 for the Dodge Cummins 24 Valve CR 2003 to 2006
Part #: PS6280CR Our Price: $1,550.00
|
Phat shaft 62 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 350 - 550hp and can be upgraded for more horse power. 62mm extended tip compressor inside of a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmissions.
NOTE: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmission. |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Phat shaft 64 for the Dodge Cummins 24 CR Valve 2003 to 2006 |
|
Phat shaft 64 for the Dodge Cummins 24 CR Valve 2003 to 2006
Part #: PS6480CR Our Price: $1,850.00
|
Phat shaft 64 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 350 - 600hp and can be upgraded for more horse power. 64mm extended tip compressor inside of a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmissions.
NOTE: Turbo comes with all install components; however, a Boost Fooler is nneded if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions |
|
Warning: getimagesize(http://cyclonediesel.com/images/Phat Shaft Turbo.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 400 Bad Request
in /hsphere/local/home/cyclone/cyclonediesel.com/manufacture.php on line 156
| Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006 |
|
Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006
Part #: PS6680CR Our Price: $1,850.00
|
Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 370 - 650hp and can be upgraded for more horse power. 66mm extended tip compressor inside of a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmissions.
Note: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions. |
|
