Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

DOUBLE WALL BLACK STAINLESS TIP 4" ID, 5" OD 12" OVERALL

ROLLED ANGLE BLACK STAINLESS TIP 4" ID, 6" OD, 18" OVERALL

DOUBLE WALL ANGLE TIP 4" ID, 5" OD 12" OVERALL

Designed for the NAVISTAR VT 365

BD Engine Brakes enable your Diesel to navigate downhill grades and mountainous terrain easier and safer than using the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and also prevent brake fade under severe grade driving.

The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents or just slowing down for a highway off ramp.

The exhaust flow is not restricted when the stainless butterfly is open in the large 4” casting that bolts into the exhaust system.

The kit is complete with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As in other BD designs, the backpressure is self-regulating. Once the pressure reaches the DuraMax specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine RPM range compared to a fixed orifice design that only offers peak retarding performance at peak rpm.

The new Allison equipped DuraMax is designed to downshift once the tow/haul button is selected, which results in a Silent Retarding Force at all vehicle speeds. Designed for the 6.6 Duramax, including the LLY engine for 04 and newer trucks.

Make use of your exhaust brake, with these BD Diesel exhaust brake manual transmission switch kits.
These BD Diesel exhaust brake manual transmission switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. BD Diesel exhaust brake manual transmission switch kits include a switch, a wiring harness, and mounting hardware to install them onto the factory manual transmission shifter.

Make use of your exhaust brake, with these BD Diesel exhaust brake manual transmission switch kits.

These BD Diesel exhaust brake manual transmission switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. BD Diesel exhaust brake manual transmission switch kits include a switch, a wiring harness, and mounting hardware to install them onto the factory manual transmission shifter.

Diesel Exhaust  Turbo Downpipe Kit 1993-94 6.5L Chevy 3"

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

Diesel Exhaust  Turbo Downpipe Kit 1994-2000 6.5L Chevy 3"

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

2023158 - Exhaust Brake Turbo Mount F650 W/ 5.9L 60# Air

UDM1 - Universal Truck Muffler

Universal Truck Muffler 
Round Muffler
Body  24 inches
Overall  30 inches
Cross Section  6 inches

All Silverline™ stainless steel systems are supplied with a highly polished muffler featuring polished welds to provide a seamless appearance. With a free-flow design, the strategically placed louvers provide sound deadening control for a more pleasant in-cab ride while still providing the deep, rich sound of the diesel engine during acceleration.

ROLLED ANGLE TIP 3 1/2" ID, 4" OD, 12" OVERALL

TURN DOWN TIP 4"ID, 4" OD, 12" OVERALL

TURN DOWN TIP 3 1/2"ID, 4" OD, 12" OVERALL

ROLLED ANGLE BLACK STAINLESS TIP W/ BOLT 4" ID, 5" OD 12" OVERALL 

ROLLED ANGLE CHROME OVER STAINLESS TIP W/ BOLT 4" ID, 5" OD 12" OVERALL

DOUBLE WALL CHROME OVER STAINLESS TIP 4" ID, 5" OD 12" OVERALL

DOUBLE WALL CHROME OVER STAINLESS ANGLE TIP 4" ID, 5" OD 12" OVERALL

DOUBLE WALL BLACK STAINLESS ANGLE TIP 4" ID, 5" OD 12" OVERALL

4" TURN-UP TRUCK TIP 4" ID, 4" OD   (Recommended For Offroad Use Only)

5" TURN-UP TRUCK TIP 5" ID, 5" OD   (Recommended For Offroad Use Only)

 UNIVERSAL BASE FOR STACKS (ALL IN-BED PLUMBING WITHOUT STACKS)

ANGLE CUT 5" STACK(STACKS ONLY)

 ANGLE CUT 5" BLACK STAINLESS STACK (STACKS ONLY)

 TURN OUT 5" STACK(STACKS ONLY)

 TURN OUT 5" BLACK STAINLESS STACK(STACKS ONLY)

 STRAIGHT CUT 5" STACK(STACKS ONLY)

STRAIGHT CUT 5" BLACK STAINLESS STACK

5" STAINLESS RAIN CAP

Dodge Universal,4"Single System 30"Muffler Delete Pipe

Dodge Universal,4"Single System 30"Muffler Delete Pipe

Dodge,Chev/GMC Universal 4"Single System 30"Muffler Delete Pipe

 XP Series Acessories

Chev/GMC Universal All Duramax 4"S/S 30"Muffler Delete Pipe
 Pro Series

Muffler Delete Pipe 4" Inlet/Outlet 30" Overall
 
There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.

Fits All Configurations.         
Part #:  MDS30   

Chev/GMC Univ.All Duramax 4" S/S 30" Muffler Delete Pipe

Muffler Delete Pipe 4"Inlet/Outlet 30"Overall.

Installer Series
 
There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.
Fits All Configurations.

Part #:  MDA30          

Chev/GMC Univ. All Duramax 5" Muffler Delete Pipe

 
Universal Muffler Delete Pipe 5" Inlet /Outlet 31" Overall

Installer Series
There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.
Fits All Configurations.
 
Part #:  MDA531          

Chev/GMAC Universal 4" Dual System 27.5" Muffler Delete Pipe

Dual Muffler Delete Pipe 4" Inlet /Outlet 27.5" Overall
Installer Series 

There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.
Fits All Configurations.
 
Part #:  MDDAL27

GM 6.5L Diesel 2500-3500'94.'00 4"Alum.Steel T/B Single Exhaust Kit

4" Aluminized Steel Turbo Back Single Exhaust Kit, Tip Included

Part # 83060

 
The all new Rapid Flow exhaust kits from Bully Dog Technologies incorporates the high flow 6” radius design with the anti-corrosion protection of aluminized steel. These kits are available for Dodge, Ford, and GM full sized diesel pickups. All kits also come with stainless steel tips to complete your exhaust.

GM Diesel 4" Rapid Flow 96-00

Part # 183071

Silverline Diesel Stacks Version 8.0

Part # DSK004

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

Part # DSK004B
8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

Part # DSK005
8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

Part # DSK005B 
8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

 Part # DSK010

Silverline Diesel Stacks Version 8.0

6"  Clamp
Part # DSK6CH

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

8" Clamp
Part # DSK8CH

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

5" Clamp
Part # DSK5CHB

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

6" Clamp
Part # DSK6CHB

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

 Part #  DSK8CHB

8" Blk. Clamp

• 8” Miter-Cut Exhaust Stacks
• Available in Silverline Polished and Nickel-black Stainless Steel
• 6” Aussie and Miter-Cut Stacks  also available
• All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately
Silverline Stack Components for Pickups
Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

TURN DOWN TIP 4" ID, 5" OD 12" OVERALL

TRUCK TIPS

 Part #   TK5012TDB4

6" DOUBLE WALL SS STRAIGHT CUT BOLT-ON 12" TIP 5" ID

6" DOUBLE WALL BLACK CHROMED SS BOLT-ON 12" TIP 5" ID

TRUCK TIPS

 Part #   TK6012DWBC

6" DOUBLE WALL CHROMED SS STRAIGHT CUT BOLT-ON 12" TIP 5" ID

TRUCK TIPS

Part #   TK6012DWBCC

6" DOUBLE WALL CHROMED SS STRAIGHT CUT BOLT-ON 12" TIP 5" ID

 TRUCK TIPS 

Part #   TK6012DWBS

6" DOUBLE WALL CHROMED SS SLASH CUT BOLT-ON 12" TIP 5" ID 

TRUCK TIPS

Part #   TK6012DWBSCC

SS 6" BOLT-ON ROLLED EDGE SLANT CUT TIP, 5" ID/12" OVERALL

TRUCK TIPS

 Part #   TK6012SRB5

6" CHROMED SS SLASH ROLLED BOLT-ON 18" TIP 4" ID

TRUCK TIPS

Part #   TK6018SRBCC

3 1/2" SADDLE CLAMP

4" SADDLE CLAMP

UNIVERSAL COMPONENTS

 Part #  4C

5" SADDLE CLAMP

 
UNIVERSAL COMPONENTS

 
Part #  5C

UNIVERSAL ADAPTER KIT 3.5" ID, 4" ID, 6" OVERALL

 (includes 2 adapters and 4 clamps)

UNIVERSAL COMPONENTS

Part #  DCK1