Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

System includes:
Computer Controlled Command Center.
Self Contained Solenoid Box.
Plug in Wiring Harness.
Weather Pack connectors.
Wide-Open Throttle Switch.
Braided Nylon Nitrous Lines and fittings.
2 Nitrous Nozzles.
2 Nitrous Jets.
10lb. Nitrous Bottle
Bottle Bracket.

The PowerFool 2 makes Nitrous simple and takes away the entire headache of wiring. This system can be installed in numerous places, so if you have your own idea on an application that you would like to use you can. The PowerFool2 has many different applications that can be applied, such as the placement and the locations of your nozzles and the amount of Nitrous you would like to spray. This application can be used even if you have NOT O-ringed your heads. If you have stock heads the amount of Nitrous being sprayed should be limited.

When using the Powerfool2 we recommend using a custom burned chip that will aid in gaining the best results.

CAUTION! This system has the capability of producing up to 300hp and should be used in accordance to your application. If you have never used Nitrous before because of the fear factor you can now enjoy the added power without the confusion and stress that usually accompanies this feared power enhancer.

RFI Cleaning Kit

Use the Rapid Flow Cleaner to keep your induction filter clean and then use the oil and prefilter to keep it that way.

AFE Filters offer:

• Medical grade cotton gauze filter media reduces air restriction and increases engine output.
• Surface area optimized to reduce pressure differential across the element resulting in reduced back pressure and increased torque.
• Precision pleat geometry optimizes airflow through intake system.
• Engineered to control maximum filter face air velocity with deep precision pleats.
• Multi-layer oiled cotton gauze attracts and traps contaminants without sacrificing air flow.
• Sturdy epoxy coated wire mesh construction protects filter media (and engine) from large debris.
• Cleanable and reusable.
• Urethane seal outlasts conventional materials (especially under extreme engine temperatures).
• The last filter your vehicle will ever need.

Models: Duramax

Airflow Increase: 245 CFM vs. 145 for stock

Replacement Filter:

• 24-90026
• (72-90026 for Pro-Guard7 Media)

Pre-Filter:

• 28-1005X (1=Gold, 2=Red, 3=Black, 4=blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

ENTER YEAR WHEN ORDERING.

04.5-05 Chevy Silverado 2500HD and 3500HD
04.5-05 GMC Sierra 2500HD and 3500HD

AEM (Advanced Engine Management) is proud to release its Workhorse HD intakes for diesel applications with a massive DRYFLOW filter element! AEM Workhorse HD intakes are available for popular late model Cummins, Duramax and PowerStroke Diesel engines. We engineer our Workhorse intakes to deliver maximum flow, filtration and durability for heavy duty applications and they even outperform the company's BRUTE FORCE intakes for these vehicles in both dust holding capacity and filter flow.

AEM's reusable DRYFLOW air filter for its Diesel applications is engineered to allow for longer service life and higher efficiency for maximum performance in between servicing (more DRYFLOW key features are below). Compared to the standard 9" Brute Force Dryflow Filter, the Workhorse Dryflow filter features over twice the surface area of filter media and utilizes deep, bull-nosed pleats to improve dust holding capacity and increase intervals between cleanings. The DRYFLOW does not use oil to trap dirt, which eliminates any chance of overoiling the filter element, takes the guesswork out of servicing your filter and dramatically reduces filter cleaning time.

AEM manufactures its intakes from mandrel-bent, lightweight aircraft aluminum with high-strength dogbone brackets and dual rubber soft mounts for maximum durability, and includes a "bullet-proof" heat shield with a powdercoated black finish, a complete hardware kit and comprehensive photo installation instructions. Workhorse HD intakes are available with a silver powdercoat or mirror-polished finish.

MAGNUM FORCE STAGE 1 COLD AIR INTAKE WITH PRO GUARD 7 FILTER, Adds 25 Horsepower and 35 Ft Lbs Of Torque, Increased Fuel Economy, Heat Shield Replaces Factory Air Box, Includes Pro Guard 7 Lifetime Reusable Filter, Instructions And Hardware

Engine - Fits

6.6L Diesel LLY, LBZ - Silverado Classic 2500 HD, 3/4 Ton

6.6L Diesel LLY, LBZ - Silverado Classic 3500, 1 Ton

6.6L Diesel LLY, LBZ - Sierra Classic 2500 HD, 3/4 Ton

6.6L Diesel LLY, LBZ - Sierra Classic 3500, 1 Ton

MAGNUM FORCE STAGE 2 COLD AIR INTAKE WITH PRO GUARD 7 FILTER AND TUBE, Adds 50 Horsepower and 100 Ft Lbs Of Torque, Increased Fuel Economy, Heat Shield Replaces Factory Air Box And Intake Tube, Includes Pro Guard 7 Lifetime Reusable Filter, Instructions And Hardware

Engine - Fits

6.6L Diesel LLY, LBZ - Silverado Classic 2500 HD, 3/4 Ton

6.6L Diesel LLY, LBZ - Silverado Classic 3500, 1 Ton

6.6L Diesel LLY, LBZ - Sierra Classic 2500 HD, 3/4 Ton

6.6L Diesel LLY, LBZ - Sierra Classic 3500, 1 Ton

GM Trucks (06-07) V8-6.6L LLY/LBZ (td) Stg 1

Cold Air Intake System, Stage 1 System, Adds 5 Horsepower and 12 Ft Lbs Of Torque, With Increased Fuel Mileage, The Replacement Solution For A Broken Air Box, Includes Air Box, Filter, Intake Tube, Instructions And Hardware

Engine - Fits

6.6L Diesel, LBZ - Silverado Classic 1500 HD, 1/2 Ton

6.6L Diesel, LBZ - Silverado Classic 1500, 1/2 Ton

6.6L Diesel, LBZ - Silverado Classic 2500 HD, 3/4 Ton

6.6L Diesel, LBZ - Silverado Classic 3500, 1 Ton

6.6L Diesel, LBZ - Sierra Classic 1500 HD, 1/2 Ton

6.6L Diesel, LBZ - Sierra Classic 1500, 1/2 Ton

6.6L Diesel, LBZ - Sierra Classic 2500 HD, 3/4 Ton

6.6L Diesel, LBZ - Sierra Classic 3500, 1 Ton

6.6L Diesel, LBZ - Sierra Classic Denali