Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

DOUBLE WALL BLACK STAINLESS TIP 4" ID, 5" OD 12" OVERALL

ROLLED ANGLE BLACK STAINLESS TIP 4" ID, 6" OD, 18" OVERALL

The Silverline line includes direct fit single and dual exhaust systems, universal stack kits, and exhaust tips.  The mandrel bent exhaust systems improve airflow for enhanced horsepower and torque.  Silverline exhaust systems include pre-welded hangers and hardware for an easy bolt-on installation.  The Silverline diesel muffler is a free-flow design with strategically placed louvers.  These louvers provide sound deadening control for a more pleasant in-cab ride, while providing the deep, rich sound of the diesel engine during acceleration

DOUBLE WALL ANGLE TIP 4" ID, 5" OD 12" OVERALL

The Silverline line includes direct fit single and dual exhaust systems, universal stack kits, and exhaust tips.  The mandrel bent exhaust systems improve airflow for enhanced horsepower and torque.  Silverline exhaust systems include pre-welded hangers and hardware for an easy bolt-on installation.  The Silverline diesel muffler is a free-flow design with strategically placed louvers.  These louvers provide sound deadening control for a more pleasant in-cab ride, while providing the deep, rich sound of the diesel engine during acceleration

Bully Dog's Rpaid Flow Exhaust Systems are designed and built with absolute mimimal degree angles on bends. This creates a free flowing, low back pressure system that allows the burbo to move air more freely, reducing exhaust temperatures. Dyno results have shown a significant gain in horsepower by simpley switching from stock to a Rapid Flow system. Bully Dog 6-inch Rapid Flow Exhaust Systems are available in 16-gauge aluminized steel.

The Rapid Flow Exhaust systems have the lowest degree mandral bends offering free flowing and low back pressue that will lower exhaust temperatures by as much as 200 degrees and provide 10 to 20 hp increases depending upon the size of the upgrade and current horsepower output. Bully Dog recommends using our 6-inch Rapid Flow System on trucks that are producing more that 550 hp. use.

• Additional Horsepower
• Lower Exhaust Gas Temperatures
• Mimimal Degree Angles on Bends
• Full Body Sound

• Dodge Cummins 5.9 Liter 24V Common Rail 2003 - 2004

Bully Dog's Rpaid Flow Exhaust Systems are designed and built with absolute mimimal degree angles on bends. This creates a free flowing, low back pressure system that allows the burbo to move air more freely, reducing exhaust temperatures. Dyno results have shown a significant gain in horsepower by simpley switching from stock to a Rapid Flow system. Bully Dog 6-inch Rapid Flow Exhaust Systems are available in 16-gauge aluminized steel. This system is a Cat-Back System for the Dodge Cummins 600.

The Rapid Flow Exhaust systems have the lowest degree mandral bends offering free flowing and low back pressue that will lower exhaust temperatures by as much as 200 degrees and provide 10 to 20 hp increases depending upon the size of the upgrade and current horsepower output. Bully Dog recommends using our 6-inch Rapid Flow System on trucks that are producing more that 550 hp. use.

• Additional Horsepower
• Lower Exhaust Gas Temperatures
• Mimimal Degree Angles on Bends
• Full Body Sound

• Dodge Cummins 5.9 Liter 24V 600 Common Rail 2004.5 - 2005

Universal Truck Muffler 
Round Muffler
Body  24 inches
Overall  30 inches
Cross Section  6 inches

All Silverline™ stainless steel systems are supplied with a highly polished muffler featuring polished welds to provide a seamless appearance. With a free-flow design, the strategically placed louvers provide sound deadening control for a more pleasant in-cab ride while still providing the deep, rich sound of the diesel engine during acceleration.

Dodge Diesel Brake - M/H 5.9L, Air/Remote 3.0 Exhaust  60psi

The spring loaded air cylinder closes the offset Stainless Steel butterfly and Stainless Steel shaft which rotates in a special bushing material to ensure that the butterfly does not stick closed or open. The butterfly has been positioned in the exhaust brake elbow so when open exhaust flow is not reduced. A threaded port for mounting an exhaust temperature probe and a port with 1/4 SS line connected is a simple method to monitor retarding performance.

BD`s lighted on/off toggle switch is wired into an electronic idle verification board for quick exhaust brake engagement. The durable air compressor that is included can also be used for other applications

Dodge Diesel Exhaust Brakes

H/D TRK. 5.9L, Air/Remote 3.0 Exhaust  60psi

BD Engine Brakes enable your Diesel to navigate downhill grades and mountainous terrain easier and safer than using the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and also prevent brake fade under severe grade driving.

The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents or just slowing down for a highway off ramp.

The exhaust flow is not restricted when the stainless butterfly is open in the large 4” casting that bolts into the exhaust system.

The kit is complete with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As in other BD designs, the backpressure is self-regulating. Once the pressure reaches the DuraMax specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine RPM range compared to a fixed orifice design that only offers peak retarding performance at peak rpm.

The new Allison equipped DuraMax is designed to downshift once the tow/haul button is selected, which results in a Silent Retarding Force at all vehicle speeds. Designed for the 6.6 Duramax, including the LLY engine for 04 and newer trucks.

Exhaust Brakes Features
  

     The exclusive alumibronz brushing and stainless steel shaft that incorporates 3 piston rings prevents exhaust leakage and the butterfly shaft from sticking open or closed.

    Butterfly, rotating shaft, leavers, brackets and all mounting hardware are made of corrosion resisant stainless steel.

    Spring loaded air cylinder ensures the butterfly always returns to the open position and the quick release valve is designed for a smooth butterfly opening cycle.

Diesel Exhaust Brake - Dodge 94-03 Remote VAC 4 "

Make use of your exhaust brake, with these BD Diesel exhaust brake manual transmission switch kits.
These BD Diesel exhaust brake manual transmission switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. BD Diesel exhaust brake manual transmission switch kits include a switch, a wiring harness, and mounting hardware to install them onto the factory manual transmission shifter.

Make use of your exhaust brake, with these BD Diesel exhaust brake manual transmission switch kits.

These BD Diesel exhaust brake manual transmission switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. BD Diesel exhaust brake manual transmission switch kits include a switch, a wiring harness, and mounting hardware to install them onto the factory manual transmission shifter.

The spring loaded air cylinder closes the offset Stainless Steel butterfly and Stainless Steel shaft which rotates in a special bushing material to ensure that the butterfly does not stick closed or open. The butterfly has been positioned in the exhaust brake elbow so when open exhaust flow is not reduced. A threaded port for mounting an exhaust temperature probe and a port with 1/4 SS line connected is a simple method to monitor retarding performance.

D`s lighted on/off toggle switch is wired into an electronic idle verification board for quick exhaust brake engagement. The durable air compressor that is included can also be used for other applications; it`s a Ram tuff product.

Dodge Ram Turbo Mount Exhaust Brake Pipe Adapater Kit 1988 - 1993 pick-ups bolts in place of the existing elbow where it is clamped to the turbo outlet and exhaust system. "Variable orifice technology" has been incorporated into this air engagement design that results in peak retarding power throughout the engine's operating rpm.

Installing a BD exhaust brake adds safety to your towing experience.

 UNIVERSAL BASE FOR STACKS (ALL IN-BED PLUMBING WITHOUT STACKS)

ANGLE CUT 5" STACK

 Exhaust Brake 5.9L MH - Truck

5.9L (1060) Cummins, H/D Truck, Ford & Freightliner Business Class, 3" Exhaust, Turbo Mount, Air Activated, 60psi

    Turbo Mount Exhaust Brake casting bolts in place of the existing elbow where it is clamped to the turbo outlet and exhaust system. BD's "Variable orifice technology" has been incorporated into this air engagement design that results in peak retarding power throughout the engine's operating rpm. The spring loaded air cylinder closes the offset Stainless Steel butterfly and Stainless Steel shaft which rotates in a special bushing material to ensure that the butterfly does not stick closed or open. The butterfly has been positioned in the exhaust brake elbow so when open exhaust flow is not reduced. A threaded port for mounting an exhaust temperature probe and a port with 1/4" SS line connected is a simple method to monitor retarding performance. BD's lighted on/off toggle switch is wired into an electronic idle verification board for quick exhaust brake engagement. The durable air compressor that is included can also be used for other applications too.

This product is designed to work for the following vehicles: (May fit other models as only the most common vehicles are listed. Please call for more info.)
Year	Make	Model	Engine Type
2005	DODGE	Ram 2500 Pickup	5.9L L6 DSL
2005	DODGE	Ram 3500 Pickup	5.9L L6 DSL
2004	DODGE	Ram 2500 Pickup	5.9L L6 DSL
2004	DODGE	Ram 3500 Pickup	5.9L L6 DSL
Year	Make	Model	Engine Type

Increasing the size of the exhaust pipe reduces the time it takes the turbocharger to develop full boost levels. Improvements in fuel economy, reduced exhaust temperture, improved apearance and a sporty sound are the benefits. 10-15 Hp increasas can be noticed when measured as response time to reach a certain speed with a measured load. 16 gauge Aluminized steel tubing.

Exhaust Kit Dodge 5" Cat Back 2003-06     Box 1 & 2

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

ROLLED ANGLE TIP 3 1/2" ID, 4" OD, 12" OVERALL

TURN DOWN TIP 4"ID, 4" OD, 12" OVERALL

TURN DOWN TIP 3 1/2"ID, 4" OD, 12" OVERALL

ROLLED ANGLE BLACK STAINLESS TIP W/ BOLT 4" ID, 5" OD 12" OVERALL 

ROLLED ANGLE CHROME OVER STAINLESS TIP W/ BOLT 4" ID, 5" OD 12" OVERALL

DOUBLE WALL CHROME OVER STAINLESS TIP 4" ID, 5" OD 12" OVERALL

DOUBLE WALL CHROME OVER STAINLESS ANGLE TIP 4" ID, 5" OD 12" OVERALL

DOUBLE WALL BLACK STAINLESS ANGLE TIP 4" ID, 5" OD 12" OVERALL

4" TURN-UP TRUCK TIP 4" ID, 4" OD   (Recommended For Offroad Use Only)

5" TURN-UP TRUCK TIP 5" ID, 5" OD   (Recommended For Offroad Use Only)

ANGLE CUT 5" BLACK STAINLESS STACK

TURN OUT 5" STACK