 |
M59-24 - ATS 3-Piece 24 VALVE EXHAUST MANIFOLD
The ATS three piece pulse manifold for the Dodge Cummins application, with its pulse exhaust flow design, increases exhaust gas efficiency, helping to spool up the turbocharger sooner with less exhaust back-pressure. The pulse manifold design eliminates the problems that persist with the stock manifold in both 12 and 24 valve engines - the shrinking and breaking of the manifolds. The stock manifolds can shrink as much as 3/8. This can cause manifold-cracking, gasket problems, and exhaust flow problems created by exhaust port misalignment. In 12 valve engines, one sees sheared off manifold bolts, and this extreme shrinkage can sometimes break the ears off the head where the stock manifold is attached. The ATS three-piece pulse manifold is cast of a much higher-grade material than the stock manifold, which will handle far more heat without being brittle. This three-piece pulse manifold comes with new socket head cap screws and washer. |
$470.00
 |
|
 |
M59-12 - ATS 3-Piece 12 VALVE EXHAUST MANIFOLD
The ATS three piece pulse manifold for the Dodge Cummins application, with its pulse exhaust flow design, increases exhaust gas efficiency, helping to spool up the turbocharger sooner with less exhaust back-pressure. The pulse manifold design eliminates the problems that persist with the stock manifold in both 12 and 24 valve engines - the shrinking and breaking of the manifolds. The stock manifolds can shrink as much as 3/8. This can cause manifold-cracking, gasket problems, and exhaust flow problems created by exhaust port misalignment. In 12 valve engines, one sees sheared off manifold bolts, and this extreme shrinkage can sometimes break the ears off the head where the stock manifold is attached. The ATS three-piece pulse manifold is cast of a much higher-grade material than the stock manifold, which will handle far more heat without being brittle. This three-piece pulse manifold comes with new socket head cap screws and washer. |
$470.00
|
|
 |
M59-24-3 - ATS 2-Piece 24 VALVE CR DODGE EXHAUST MANIFOLD
THIS NEW ATS 2-PIECE EXHAUST MANIFOLD CURES THE EXREME BACK PRESSURE PROBLEMS THAT ARE PRESENT IN THE #4 & #5 CLYINDER OF THE STOCK MANIFOLD! The ATS two piece pulse manifold for the Dodge Cummins application, with its pulse exhaust flow design, increases exhaust gas efficiency, helping to spool up the turbocharger sooner with less exhaust back-pressure. The pulse manifold design eliminates the problems that persist with the stock manifold - the shrinking and breaking of the manifolds. The stock manifolds can shrink as much as 3/8. This can cause manifold-cracking, gasket problems, and exhaust flow problems created by exhaust port misalignment. The ATS two-piece pulse manifold is cast of a much higher-grade material than the stock manifold, which will handle far more heat without being brittle. |
$470.00
|
|
|
HTPMSINS12 - 12V Manifold install kit
A complete mounting kit
The kit includes:
Head to manifold gaskets
Manifold to turbo gasket
Turbo oil drain gasket
Turbo mounting studs
Turbo mounting bolts
Turbo mounting nuts
HPC coating is also available $150. |
$35.00
|
|
|
HTPMSINS24 - 24V Manifold install kit
A complete mounting kit
The kit includes:
Head to manifold gaskets
Manifold to turbo gasket
Turbo oil drain gasket
Turbo mounting studs
Turbo mounting bolts
Turbo mounting nuts
HPC coating is also available $150. |
$45.00
|
|
 |
INT-D-24CR** - ATS Arc-Flow Intake Manifold For 03-06 Dodge
The ATS Ram Intake manifold provides superior airflow versus the stock intake horn. Arc-flow design increases efficiency and improves air velocity into the engine even at low boost levels. The shrouded back side of the manifold provides an embossed area where gauges and other inputs such as water injection/nitrous/pressure switches etc., can tap into providing a clean and easy install. Lower restriction and improved airflow means a reduction in turbo surge, as well as featuring an optimized nitrous or water injection port that delivers the flow directly towards the intake port of the motor. This is one item that anyone can install simply and quickly for improved performance! The ATS Arc-flow manifold is available in clear-coat metal finish, white powdercoat, and black powdercoat with all hardware and plugs included.
ENTER COLOR CODE WHEN ORDERING.
BK - Black
WH - White
SI - Silver |
$325.00
|
|
|
INT-D-12V - ATS Arc-Flow Intake Manifold For 94-98 Dodge
The ATS Ram Intake manifold provides superior airflow versus the stock intake horn. Arc-flow design increases efficiency and improves air velocity into the engine even at low boost levels. The shrouded back side of the manifold provides an embossed area where gauges and other inputs such as water injection/nitrous/pressure switches etc., can tap into providing a clean and easy install. Lower restriction and improved airflow means a reduction in turbo surge, as well as featuring an optimized nitrous or water injection port that delivers the flow directly towards the intake port of the motor. This is one item that anyone can install simply and quickly for improved performance! The ATS Arc-flow manifold is available in clear-coat metal finish, white powdercoat, and black powdercoat with all hardware and plugs included.
ENTER COLOR CODE WHEN ORDERING.
BK - Black
WH - White
SI - Silver |
$325.00
|
|
|
INT-D-24V - ATS Arc-Flow Intake Manifold For 98.5-02 Dodge
The ATS Ram Intake manifold provides superior airflow versus the stock intake horn. Arc-flow design increases efficiency and improves air velocity into the engine even at low boost levels. The shrouded back side of the manifold provides an embossed area where gauges and other inputs such as water injection/nitrous/pressure switches etc., can tap into providing a clean and easy install. Lower restriction and improved airflow means a reduction in turbo surge, as well as featuring an optimized nitrous or water injection port that delivers the flow directly towards the intake port of the motor. This is one item that anyone can install simply and quickly for improved performance! The ATS Arc-flow manifold is available in clear-coat metal finish, white powdercoat, and black powdercoat with all hardware and plugs included.
ENTER COLOR CODE WHEN ORDERING.
BK - Black
WH - White
SI - Silver |
$325.00
|
|
|
