Cyclone Diesel Performance Diesel Performance Parts


Dodge 24V 98.5-02 Menu
Package Deals
Electronics
Exhaust
Intakes
Gauges
Fuel/Propane/Nitrous
Manifolds
Trans/Drivetrain
Turbochargers
Miscellaneous


Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

 
    Turbine Housing 14cm wastegated 94-02 6BTA 28#
Turbine Housing 14cm wastegated 94-02 6BTA 28#
Turbine Housing 14cm wastegated 94-02 6BTA 28#
Part #: 1045920
Our Price: $685.00

Buy Now
Flowed turbine housings for low and high rpm boost control to match your engine for maximum air control. Waste gated and non waste gated housings are available to match your high horsepower engine. The stock turbocharger exhaust housing on the 94-98 12 valve engine is a 12 cubic centimeter that performs well on engines that are developing up to 250 hp. Once you are above this rating, the exhaust flow is so high that the stock housing offers a high drive pressure that prevents the boost pressure from entering the combustion chamber. We have a 14 cubic center meter waistegated housing that will handle this extra 250 hp + exhaust volume and reduce the amount of drive pressure required to turn the turbine wheel. In the 1989/90 5.9 6BTA Cummins a 18 cubic centimeter housing is a little to large and the turbo lag can be eliminated with a 16 cubic center housing. The 91-93 engines have a 20 square center housing and turbo lag is quite obvious. By installing the non-waste gated 16 square centimeter housing, higher boost pressure and our larger injectors can pump the engine up to a 210 hp engine with 22 pounds of boost pressure.
    Super B Single Turbo 94-02 Dodge 5.9L
Super B Single Turbo 94-02 Dodge 5.9L
Super B Single Turbo 94-02 Dodge 5.9L
Part #: 1045220
Our Price: $1,485.00

Buy Now
A simple description of the operation of a turbo is to compare it to an air pump. The ultimate design is for the turbo to reach its peak boost pressure quickly and not create a lot of exhaust backpressure to drive the turbine wheel. BD can supply a number of less restrictive and quicker responding exhaust housings and a mix of turbos that do a ok job. But the best thing to do is to engineer a new turbo that will have a much broader rpm range that the turbo will be effective at. BD:s new S300 series Air Werks turbos have been engineered for the Dodge Ram Cummins that has had a 75-200 hp modification. The turbine housing, compressor housing and wheels are very unique in there design. The result is low exhaust temperature and a broad responsive range of air flow. We have as well designed a twin compounded turbo kit for 150-300 hp modifications. These turbochargers can reduce smoke emissions, cool exhaust temperatures and deliver more air at lower boost pressures on modified engines like no other turbo kit on the market.
    Super B Twin Turbo Kit 94-02
Super B Twin Turbo Kit 94-02
Super B Twin Turbo Kit 94-02
Part #: 1045320
Our Price: $3,825.00

Buy Now
A simple description of the operation of a turbo is to compare it to an air pump. The ultimate design is for the turbo to reach its peak boost pressure quickly and not create a lot of exhaust backpressure to drive the turbine wheel. BD can supply a number of less restrictive and quicker responding exhaust housings and a mix of turbos that do a ok job. But the best thing to do is to engineer a new turbo that will have a much broader rpm range that the turbo will be effective at. BD:s new S300 series Air Werks turbos have been engineered for the Dodge Ram Cummins that has had a 75-200 hp modification. The turbine housing, compressor housing and wheels are very unique in there design. The result is low exhaust temperature and a broad responsive range of air flow. We have as well designed a twin compounded turbo kit for 150-300 hp modifications. These turbochargers can reduce smoke emissions, cool exhaust temperatures and deliver more air at lower boost pressures on modified engines like no other turbo kit on the market.
    Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002
Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002
Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002
Part #: PS6480
Our Price: $1,650.00

Buy Now
Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002. Supports 350 - 575hp and can be upgraded for a new Dodge. 64mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation
    Super Phat shaft 66 for the Dodge Cummins 12/24 Valve 1994-2002
Super Phat shaft 66 for the Dodge Cummins 12/24 Valve 1994-2002
Super Phat shaft 66 for the Dodge Cummins 12/24 Valve 1994-2002
Part #: SPS6680
Our Price: $1,650.00

Buy Now
Super Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 400 - 750hp and can be upgraded into a twin setup. 66mm extended tip compressor inside a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft.

NOTE: The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions.
    Dodge Diesel 5.9L Super B Special Turbo - 1994-2002
Dodge Diesel 5.9L Super B Special Turbo - 1994-2002
Dodge Diesel 5.9L Super B Special Turbo - 1994-2002
Part #: 1045120
Our Price: $1,810.00

Buy Now

Designed in a joint engineering effort between BD Diesel Performance and Borg Warner Turbo Systems AirWerks program, these new turbo systems for the 5.9 liter Cummins engine flow enough air for racing applications, yet are responsive and durable enough for street and heavy towing applications. Plus, they're backed by a one year factory warranty!*

Turbocharger lag is usually the result of an improperly matched turbocharger. As the compressor wheel size is increased to meet the airflow requirements of the engine, it gets heavier, which hurts response time. BD's turbo systems, using Borg Warners unique Extended Tip compressor wheel technology and low inertia, full-floating journal bearings, outperforms ball bearing turbochargers of a similar size.

Our unique dual-volute turbine housing picks up low rpm exhaust pulses for improved turbine response, while the dual-action waste gate bleeds off turbine drive pressure from both volutes. BD's turbo systems also feature a heavy-duty waste gate actuator that prevents pre-mature opening caused by high exhaust pressure. You can even fine-tune your BD/AirWerks turbo for ambient temperature and barametric pressure changes using BD's adjustable waste gate control.

Put simply, you'll get more power, quicker response, cooler EGT's and lower exhaust emissions with a BD/AirWerks turbocharger! And, you'll have the added benefit of proven journal bearing technology--the very same used in 99% of the turbochargers produced in the world since 1921.

SINGLE TURBO SYSTEMS

All of BD's single turbo systems are designed for easy, bolt-on replacement. This is a complete kit, not just a turbo but all the parts needed for installation. It has BD's adjustable waste gate, down pipe and for some applications an exhaust adpater is included for stock exhaust mounting. If you want the turbo seperately, just ask for it.

Super B Special: The Super B Special bridges the performance gap between the Super B turbo and the Super B twin system. Flowing an amazing 80 lbs. of air per minute (compared to 61 lbs./minute for the Super B), the Super B Special is perfect for late-model Cummins common-rail or modified 12-valve engines and can deliver enough air for 550-625 rear wheel horsepower on diesel only. A bolt-in replacement for the stock turbo, the Super B Special kit includes all necessary adapters, new down pipe, spring-loaded T-bar clamps and turbo feed/drain fittings. kits
1994-1999 stock engines have the 12 sq cm w/g hsg that can be quite restrictive when the power is increased above 300 flywheel HP and results in high exhaust temperature.

    Super B Twin Turbo Kit 1998.5-2002 24V Dodge Upgrade
Super B Twin Turbo Kit 1998.5-2002 24V Dodge Upgrade
Super B Twin Turbo Kit 1998.5-2002 24V Dodge Upgrade
Part #: 1045325
Our Price: $3,175.00

Buy Now

BD`s Super B Twin turbo kits are designed for Dodge Rams with the Cummins Diesel engine and modifications that with the right amount of fuel and air, they will develop 350-500 rear wheel Horsepower. 

This engineered two stage compounded set of Air Werks S300 turbochargers meets the engine’s air requirements and keeps exhaust emissions to a minimum and exhaust temperatures low.  The turbo boost developed by the high pressure turbo provides quick, low engine rpm response.  This air charge is compounded by the low pressure turbo which has a broad compressor map for the high engine rpm.  The high pressure turbo is the same one we use in the Super B single kit so you can progress from the single turbo to the twins as your desire for more power develops.  

Tests show that at 450 rear wheel horsepower, pre-turbo exhaust temperatures of 1175 F were experienced and 51 pounds of turbo boost was developed on a 2002 ISB Cummins with the exhaust smoke level of only 3 out of 10. O-ringing of the head is not a requirement at this pressure.  

Even higher horse power gains and turbo boost pressures can be achieved when the twins are installed in conjunction with nitrous to overcome the inefficiencies of the stock intercooler.  

The kit is complete with a SS X Intake, exhaust and intake piping, oil drains, heat shields and the 2003-2005 application even comes with a 3-piece pulse exhaust manifold to bolt on.

Super B Twin Turbo Kit 1998.5-2002 24V Dodge Upgrade

 

    Super Stock 62 (3rd Gen.)
Super Stock 62 (3rd Gen.)
Super Stock 62 (3rd Gen.)
Part #: 2462359
Our Price: $1,606.50

Buy Now
HT-2462359 - Super Stock 62 (3rd Gen.)
Quickspool Turbo
14 cm Turbine Housing
For trucks with 475-575 Horsepower.
04.5-06 Trucks Require a Boost Control Resistor. (Part Number - HTBR)
    Pro Street 66 (3rd Gen.)
Pro Street 66 (3rd Gen.)
Pro Street 66 (3rd Gen.)
Part #: 2466369
Our Price: $1,795.50

Buy Now
Quickspool Turbo
14 cm Turbine Housing
For trucks with 575-675 Horsepower.
04.5-06 Trucks Require a Boost Control Resistor. (Part Number - HTBR)
    S - Turbo Guard 12-24V APPS
S - Turbo Guard 12-24V APPS
S - Turbo Guard 12-24V APPS
Part #: 1047214-S
Our Price: $733.33

Buy Now
High horsepower Dodge Ram Cummins Diesel trucks equipped with aftermarket turbochargers will typically display damaging surge characteristics that a TurboGuard can prevent. BDs TurboGuard blow-off valve protects your stock or aftermarket turbo from surging and the resulting compressor wheel explosions. This new advanced TurboGuard kit has a microprocessor with 6 different custom settings that are tuned to your application:
  • Valve Opening Pressure
  • Valve Opening Duration
  • Activation Sensitivity
  • Clutch Cancellation
  • and more
    R - Turbo Guard 12-24V APPS
R - Turbo Guard 12-24V APPS
R - Turbo Guard 12-24V APPS
Part #: 1047214-R
Our Price: $733.33

Buy Now
High horsepower Dodge Ram Cummins Diesel trucks equipped with aftermarket turbochargers will typically display damaging surge characteristics that a TurboGuard can prevent. BDs TurboGuard blow-off valve protects your stock or aftermarket turbo from surging and the resulting compressor wheel explosions. This new advanced TurboGuard kit has a microprocessor with 6 different custom settings that are tuned to your application:
  • Valve Opening Pressure
  • Valve Opening Duration
  • Activation Sensitivity
  • Clutch Cancellation
  • and more
    X Hook Turbo Wast Gate Control
X Hook Turbo Wast Gate Control
X Hook Turbo Wast Gate Control
Part #: 1045991
Our Price: $61.50

Buy Now
Turbo Boost Builders

Whether you want to control turbo boost or simply want more of it, BD Diesel Performance has your solution! BD offers Turbo Boost Controls for most Dodge-Cummins.
             
BD's adjustable Waste Gate Kits keep the bypass valve closed, raising boost levels for increased performance. These kits include stainless steel brackets and a dash pot with a heavier spring and locking jam nut for precise boost pressure settings.

Prices are subject to change without notice.
Cyclone Diesel Performance Parts
Ford 6.4L 08+
Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous
Ford 6.0L 03.5-07
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Trans/Drivetrain | Miscellaneous
Ford 7.3L 99-03
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Trans/Drivetrain | Turbochargers | Miscellaneous
Ford 7.3L 94-98
Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Trans/Drivetrain | Turbochargers | Miscellaneous
Dodge 6.7L 07.5+
Electronics | Exhaust
Dodge CR 03-07
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Manifolds | Trans/Drivetrain | Turbochargers | Miscellaneous
Dodge 24V 98.5-02
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Manifolds | Trans/Drivetrain | Turbochargers | Miscellaneous
Dodge 12V 94-98
Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Manifolds | Trans/Drivetrain | Turbochargers | Miscellaneous
Dodge 1st Gen 89-93
Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Trans/Drivetrain | Turbochargers | Miscellaneous
GM Duramax 07-08 LMM
Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Turbochargers | Miscellaneous
GM Duramax 06-07 LBZ
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Turbochargers | Miscellaneous
GM Duramax 04.5-06 LLY
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Manifolds | Trans/Drivetrain | Turbochargers | Miscellaneous
GM Duramax 01-04 LB7
Package Deals | Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Manifolds | Trans/Drivetrain | Turbochargers | Miscellaneous
GM Turbo Diesel 6.5L
Electronics | Exhaust | Intakes | Gauges | Fuel/Propane/Nitrous | Trans/Drivetrain
By Manufacture
AEM | AFE | AIRAID | ARP | ATS Diesel | Auto Meter | Banks Power | BD Power | Bully Dog | Diablo Sport | Diesel Performance Products | Dr. Performance | Edge | High Tech Turbo
Industrial Injection | K&N | MBRP | PPE | Predator | Ready Ramp | Silverline | Snow Performance | Stanadyne | Superchips | TS Performance | TST Products | Van Aaken

About CDP | Dealers | Feedback | DFW Diesel Forum
Return Policy

Web Design By TXprogrammer
Send mail to webmaster@cyclonediesel.com with questions or comments about this web site.
Cyclone Diesel Performance
Last modified: 08/04/2007