Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

High Performance OE Replacement Air Filter, One Of The Best Horsepower To Dollar Values, Limited Lifetime Warranty, Merely Clean And Reuse, Up To 30% Increased Flow, Up To 5 HP More, Improves Fuel Mileage And Throttle Response, Direct Fit .

HIGH PERFORMANCE REPLACEMENT AIR FILTER -- Increased Filter Area For Greater Flow And Filtration Capacity, Makes More Power And Improves Gas Mileage, Reusable Filter Can Be Re-Cleaned, Perfect Direct Replacement Fit, Works Better Than Paper Or Foam Filters, Pre-Oiled Filter Won't Damage Engine Sensors, Tight Seal Without Gaskets Or Sealants, Withstands Extreme Engine Temperatures For Extended-Service Life, Manufacturers' Million Mile Warranty

Engine - Fits V8, 6.0L, Turbo Diesel - Excursion

High Performance OE Replacement Air Filter, One Of The Best Horsepower To Dollar Values, Limited Lifetime Warranty, Merely Clean And Reuse, Up To 30% Increased Flow, Up To 5 HP More, Improves Fuel Mileage And Throttle Response, Direct Fit

High Performance OE Replacement Air Filter, One Of The Best Horsepower To Dollar Values, Limited Lifetime Warranty, Merely Clean And Reuse, Up To 30% Increased Flow, Up To 5 HP More, Improves Fuel Mileage And Throttle Response, Direct Fit, 2 Required

High Performance OE Replacement Air Filter, One Of The Best Horsepower To Dollar Values, Limited Lifetime Warranty, Merely Clean And Reuse, Up To 30% Increased Flow, Up To 5 HP More, Improves Fuel Mileage And Throttle Response, Direct Fit

Vehicle Years: 1999.5 - 2001
Models: Ford Pickup, Excurison
Airflow Increase: 480 CFM vs 147 CFM for stock @1.5" Water
Dyno Results: 15 Hp Over Stock
Box Dimensions: 17 X 9 X 11"

Replacement Filter:

• 24-40035 (Standard)
• 24-91006 (Mega Cannon Top)
• 72-40035 (Pro-Guard7)

Pre-filters:

• 28-10011 (Gold)
• 28-10012 (Red)
• 28-10013 (Black)
• 28-10014 (Blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

Vehicle Years: 2002-2003 7.3L
Models: Pickup F Series, Excusrion
Airflow Increase: 480 CFM vs 147 CFM for stock @1.5" Water
Dyno Results: 15 Hp over stock
Box Dimensions: 17 X 9 X 11"

Replacement Filter:

• 24-40035 (Standard)
• 24-91006 (Mega Cannon Top)
• 72-40035 (Pro-guard7)

Pre-filters:

• 28-10011 (Gold)
• 28-10012 (Red)
• 28-10013 (Black)
• 28-10014 (Blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

Vehicle Years: 1998-2003
Models: Ford Pickup, Excursion
Airflow Increase: 582 CFM vs 277 CFM for stock @1.5" Water
Dyno Results: 50 Hp Over stock - Max Gain
Box Dimensions: 22 X 17 X 14"

• 24-91018 (Standard)
• 72-90020 (Pro-guard7)

Pre-filters:

• 28-10041 (Gold)
• 28-10042 (Red)
• 28-10043 (Black)
• 28-10044 (Blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

Vehicle Years: 2003-2004
Models: Pickup - power Stroke 6.0L
Box Dimensions: 9 X 11 X 17"

Replacement Filter:

• 14-10093 (Standard)
• 71-10093 (Pro-guard7)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

Vehicle Years: 1994-1997
Models: Ford Power Stroke
Airflow Increase: 528 CFM vs 312 CFM for stock @1.5" Water
Box Dimensions: 19 X 17 X 13"

Replacement Filter:

• 24-90009 (Standard)
• 24-91009 (Mega Cannon Top)
• 72-90009 (Pro-guard7)

Pre-filters:

• 28-10051 (Gold)
• 28-10052 (Red)
• 28-10053 (Black)
• 28-10054 (Blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

STAGE 2 COLD AIR INTAKE -- Up To 50 Horsepower Increase, Easy To Install In Less Than 45 Minutes, A Great All Around Air Intake System, Unique Isolated Design Blocks Engine Heat From Air Filter, Replaces Factory Air Filter And Air Box, Increases Air Intake Velocity For Improved Air Flow And Torque Allowing Quicker Acceleration And Better Performance, Includes A Standard Media Air Filter For Improved Air Flow And Torque For Better Performance, Radial Universal Cone Filter And Heat Shield, Durable And Corrosion Resistant Components

STAGE 1, MAGNUM FORCE, COLD AIR INTAKE REPLACEMENT FILTER -- Direct Fit Filter Restores The Flow Of Your Cold Air Intake

V8, 6.0L, Turbo Diesel - F250, 3/4 Ton

V8, 6.0L, Turbo Diesel - F350, 1 Ton

Pro-Guard 7 OE Replacement Air Filter, Flows More Air, One Of The Best Horsepower Per Dollar Values, Up To 30% Increased Flow, Up To 5 HP More, Improves Fuel Mileage And Throttle Response, Direct Fit, Stops More Dirt And Dust, Lasts Longer Than Other High Performance Filters, Reduces Engine Wear .

Engine - Fits

V8, 7.3L, Turbo Diesel - E150 Econoline, 1/2 Ton

V8, 7.3L, Turbo Diesel - E250 Econoline, 3/4 Ton

V8, 7.3L, Turbo Diesel - E350 Econoline, 1 Ton

Models:

• Ford Pickup
• Excurison

Airflow Increase: 480 CFM vs 147 CFM for stock @1.5" Water

Dyno Results: 15 Hp Over Stock

Replacement Filter:

• 24-40035 (Standard)
• 24-91006 (Mega Cannon Top)
• 72-40035 (Pro-Guard7)

Pre-filters:

• 28-10011 (Gold)
• 28-10012 (Red)
• 28-10013 (Black)
• 28-10014 (Blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

Box Dimensions: 17 X 9 X 11in

Cold Air Intake System, Stage 2 System, The Replacement Solution For A Broken Air Box, Includes Air Box, Filter, Intake Tube, Instructions And Hardware, Adds 8 Horsepower And Increases Torque, Comes With Pro Guard 7 Filter.

Engine - Fits

V8, 7.3L, Turbo Diesel - F250, 3/4 Ton

V8, 7.3L, Turbo Diesel - F350, 1 Ton

Stage 2 Cold Air Intake System Type XP

Magnum FORCE intake kits from aFe give your vehicle the air it needs by replacing the restrictive factory intake system with a high flow conical air filter, and providing isolation from the hot engine air. There are two types of magnum FORCE intake kits: Stage One, and Stage Two. Stage One kits replace the factory air box with a housing and conical filter assembly, and may include a heat shield. Stage Two kits replace the entire intake tract all the way back to the Turbo or intake manifold, providing the ultimate level of fresh, clean, cool air to boost your performance.

Engine models this part is compatible with:

• Ford 6.0L Powerstroke 03-07

03-06  Dodge Ram Cummins L6-5.9L

25 HP and 78 FT/LB in 5 minutes!

Attention all 03-06 Dodge Ram Cummins owners!  AFE has designed a quick install kit that every Dodge owner can't pass up. It's affordable, installs in 5 minutes and it adds power and performance without breaking the bank. The kit is designed to utilize the factory mounting slots on the upper housing and snaps in. You get 17 HP & 78 lbs/ft of Torque in 5 minutes!

Here's what you need to do;

Step 1: Loosen the factory clamp holding the stock air intake tube to the housing.

Step 2: Remove the air temp. sensor from the upper housing.

Step 3: Remove the stock upper housing and the OE air filter.

Step 4: Install the new AFE upper housing and filter.

Step 5: Insert and secure the air intake tube to the AFE housing.

Step 6: Secure the air temp. sensor to the AFE housing.

Your done! 25HP Max Gain at 1190 RPM and 78 FT/LB Max Gain at 1190 RPM!