Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

DOUBLE WALL BLACK STAINLESS TIP 4" ID, 5" OD 12" OVERALL

ROLLED ANGLE BLACK STAINLESS TIP 4" ID, 6" OD, 18" OVERALL

DOUBLE WALL ANGLE TIP 4" ID, 5" OD 12" OVERALL

C4500/5500 GMC 6.6L C/W Air Compressor

BD Engine Brakes enable your Diesel to navigate downhill grades and mountainous terrain easier and safer than using the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and also prevent brake fade under severe grade driving.

The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents or just slowing down for a highway off ramp.

The exhaust flow is not restricted when the stainless butterfly is open in the large 4” casting that bolts into the exhaust system.

The kit is complete with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As in other BD designs, the backpressure is self-regulating. Once the pressure reaches the DuraMax specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine RPM range compared to a fixed orifice design that only offers peak retarding performance at peak rpm.

The new Allison equipped DuraMax is designed to downshift once the tow/haul button is selected, which results in a Silent Retarding Force at all vehicle speeds. Designed for the 6.6 Duramax, including the LLY engine for 04 and newer trucks.

BD Engine Brakes enable your Diesel to navigate downhill grades and mountainous terrain easier and safer than using the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and also prevent brake fade under severe grade driving.

The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents or just slowing down for a highway off ramp.

The exhaust flow is not restricted when the stainless butterfly is open in the large 4” casting that bolts into the exhaust system.

The kit is complete with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As in other BD designs, the backpressure is self-regulating. Once the pressure reaches the DuraMax specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine RPM range compared to a fixed orifice design that only offers peak retarding performance at peak rpm.

The new Allison equipped DuraMax is designed to downshift once the tow/haul button is selected, which results in a Silent Retarding Force at all vehicle speeds. Designed for the 6.6 Duramax, including the LLY engine for 04 and newer trucks.

BD Engine Brakes enable your Diesel to navigate downhill grades and mountainous terrain easier and safer than using the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and also prevent brake fade under severe grade driving.

The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents or just slowing down for a highway off ramp.

The exhaust flow is not restricted when the stainless butterfly is open in the large 4” casting that bolts into the exhaust system.

The kit is complete with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As in other BD designs, the backpressure is self-regulating. Once the pressure reaches the DuraMax specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine RPM range compared to a fixed orifice design that only offers peak retarding performance at peak rpm.

The new Allison equipped DuraMax is designed to downshift once the tow/haul button is selected, which results in a Silent Retarding Force at all vehicle speeds. Designed for the 6.6 Duramax, including the LLY engine for 04 and newer trucks.

Make use of your exhaust brake, with these BD Diesel exhaust brake manual transmission switch kits.
These BD Diesel exhaust brake manual transmission switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. BD Diesel exhaust brake manual transmission switch kits include a switch, a wiring harness, and mounting hardware to install them onto the factory manual transmission shifter.

Make use of your exhaust brake, with these BD Diesel exhaust brake manual transmission switch kits.

These BD Diesel exhaust brake manual transmission switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. BD Diesel exhaust brake manual transmission switch kits include a switch, a wiring harness, and mounting hardware to install them onto the factory manual transmission shifter.

Diesel Exhaust Kit, Stainless Single - 2001-2006 Chevy Duramax

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

Diesel Exhaust Kit, Stainless Single - 2001-2006 Chevy Duramax

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

Diesel Exhaust Kit, Stainless Single - 2001-2006 Chevy Duramax

Increasing the size of the exhaust pipe reduces the time it takes the

turbocharger to develop full boost levels. Improvements in fuel

economy, reduced exhaust temperture, improved apearance and a sporty

sound are the benefits. 10-15 Hp increasas can be noticed when

measured as response time to reach a certain speed with a measured

load. 16 gauge Aluminized steel tubing.

2023158 - Exhaust Brake Turbo Mount F650 W/ 5.9L 60# Air

UDM1 - Universal Truck Muffler

Universal Truck Muffler 
Round Muffler
Body  24 inches
Overall  30 inches
Cross Section  6 inches

All Silverline™ stainless steel systems are supplied with a highly polished muffler featuring polished welds to provide a seamless appearance. With a free-flow design, the strategically placed louvers provide sound deadening control for a more pleasant in-cab ride while still providing the deep, rich sound of the diesel engine during acceleration.

ROLLED ANGLE TIP 3 1/2" ID, 4" OD, 12" OVERALL

TURN DOWN TIP 4"ID, 4" OD, 12" OVERALL

TURN DOWN TIP 3 1/2"ID, 4" OD, 12" OVERALL

ROLLED ANGLE BLACK STAINLESS TIP W/ BOLT 4" ID, 5" OD 12" OVERALL 

ROLLED ANGLE CHROME OVER STAINLESS TIP W/ BOLT 4" ID, 5" OD 12" OVERALL

DOUBLE WALL CHROME OVER STAINLESS TIP 4" ID, 5" OD 12" OVERALL

DOUBLE WALL CHROME OVER STAINLESS ANGLE TIP 4" ID, 5" OD 12" OVERALL

DOUBLE WALL BLACK STAINLESS ANGLE TIP 4" ID, 5" OD 12" OVERALL

4" TURN-UP TRUCK TIP 4" ID, 4" OD   (Recommended For Offroad Use Only)

5" TURN-UP TRUCK TIP 5" ID, 5" OD   (Recommended For Offroad Use Only)

 UNIVERSAL BASE FOR STACKS (ALL IN-BED PLUMBING WITHOUT STACKS)

ANGLE CUT 5" STACK(STACKS ONLY)

 ANGLE CUT 5" BLACK STAINLESS STACK (STACKS ONLY)

 TURN OUT 5" STACK(STACKS ONLY)

 TURN OUT 5" BLACK STAINLESS STACK(STACKS ONLY)

 STRAIGHT CUT 5" STACK(STACKS ONLY)

STRAIGHT CUT 5" BLACK STAINLESS STACK

5" STAINLESS RAIN CAP

2001-2005 CHEVY/GMC DURAMAX 6.6 FRONT BY-PASS KIT W/ 4-BOLT FLANGE 304SS

1994-2007 DUAL OUTLET MUFFLER ELIMINATOR PIPE 30" 762mm (CHEV/GM/DODGE) (CS103,CS104,DS104)

ALUMINIZED TURBO-BACK CHEV/GMC DURAMAX 6.6 2001-2007(SINGLE) With Rolled Edge Tip

Aluminized, Turbo back, 6.6L, 2500 & 3500, 2 and 4 wheel drive, all cabs & beds

Off-road use only

Exhaust Systems      

XP Series

2001-2007
Chevy/GMC 2500/3500 Duramax (Classic)
Down Pipe Back, Single Side, Off-Road (includes front pipe)

Exhaust Systems      

XP Series

2001-2007
Chevy/GMC 2500/3500 Duramax
Down Pipe Back, Cool Duals™, Off-Road (includes front pipe)

Exhaust Systems      

XP Series

2001-2007
Chevy/GMC 2500/3500 Duramax Classic
5" Down Pipe Back, Off-Road (includes front pipe)

KEY FEATURES:

Delivers a rich, mellow exhaust note

Installs with common hand tools

Can improve fuel economy by 1-2 mpg

Boosts torque and horsepower

Complete Cat Back System

The Best Systems Start With the Best Material

Exhaust Systems      

XP Series

2001-2005
Chevy/GMC 2500/3500 Duramax
5" Cat Back, EC/CC

KEY FEATURES:

Delivers a rich, mellow exhaust note

Installs with common hand tools

Can improve fuel economy by 1-2 mpg

Boosts torque and horsepower

Complete Cat Back System

Exhaust Systems      

XP Series

2006-2007
Chevy/GMC 2500/3500 Duramax Classic
5" Cat Back, EC/CC

KEY FEATURES:

Delivers a rich, mellow exhaust note

Installs with common hand tools

Can improve fuel economy by 1-2 mpg

Boosts torque and horsepower

Complete Cat Back System

Exhaust Systems      

Installer Series

Exhaust Systems      

Installer Series

Exhaust Systems      

Installer Series

Exhaust Systems      

Installer Series

2001-2005
Chevy/GMC 2500/3500 Duramax

5" Cat Back, EC/CC  Single Side

Installer Series

KEY FEATURES:

Delivers a rich, mellow exhaust note

Installs with common hand tools

Can improve fuel economy by 1-2 mpg

Boosts torque and horsepower

Complete Cat Back System

Dodge Universal,4"Single System 30"Muffler Delete Pipe

Dodge Universal,4"Single System 30"Muffler Delete Pipe

Dodge,Chev/GMC Universal 4"Single System 30"Muffler Delete Pipe

 XP Series Acessories

Chev/GMC Universal All Duramax 4"S/S 30"Muffler Delete Pipe
 Pro Series

Muffler Delete Pipe 4" Inlet/Outlet 30" Overall
 
There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.

Fits All Configurations.         
Part #:  MDS30   

Chevy/GMC 01-05 All Duramax 4" Front-Pipe w/Flange

Installer Series

GMAL401

Chev/GMC Univ.All Duramax 4" S/S 30" Muffler Delete Pipe

Muffler Delete Pipe 4"Inlet/Outlet 30"Overall.

Installer Series
 
There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.
Fits All Configurations.

Part #:  MDA30          

Chev/GMC Univ. All Duramax 5" Muffler Delete Pipe

 
Universal Muffler Delete Pipe 5" Inlet /Outlet 31" Overall

Installer Series
There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.
Fits All Configurations.
 
Part #:  MDA531          

Chev/GMAC Universal 4" Dual System 27.5" Muffler Delete Pipe

Dual Muffler Delete Pipe 4" Inlet /Outlet 27.5" Overall
Installer Series 

There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that we build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.
Fits All Configurations.
 
Part #:  MDDAL27

Chev/GMC 01-07 Duramax(Classic)Down Pipe Back(incl.front pipe)SMOKERS™

Chev/GMC Duramax 01-07 Down Pipe Back (incl.front pipe),SMOKERS™ 

IN Series

Down Pipe Back (incl.front pipe),SMOKERS™

Part #:  S8000AL

 Chev/GMC 1 pc Univ. Stack 6"Angle Cut,36"Mirror Polished T304 S/S Stack

Pro Series 
Give your truck the diesel drag racer’s edge with these T304 stainless steel stacks guaranteed to never rust. These massive 6” stacks are our most popular and look great either in duals or as singles. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.

 Chev/GMC 1pc Univ. Stack 5"Angle Cut, 36" Mirror Polish S/S Stack

Chev/GMC 1pc Univ. Stack 5"Angle Cut, 48" Mirror Polish S/S
Pro Series

Give your truck the diesel drag racer’s edge with these T304 stainless steel stacks guaranteed to never rust. With these extra tall pipes there is no question that they will see you coming. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.

Fits all SMOKERS™ systems.

Part #:  B1540
     

Chev/GMC 1 pc Universal Stack 4" Angle Cut, 36" Mirror Polish

4" Angle Cut, 36" Mirror Polished T304 Stainless Steel Stack (1 pc)

Pro Series
Give your truck the diesel drag racer’s edge with these T304 stainless steel stacks guaranteed to never rust. These compact 4” angle cut pipes give your rig a streamlined look. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.

Fits all SMOKERS™ systems. 

Part #:  B1410           

Chev/GMC 1 pc Universal Stack 4" Turn Out, 36" Mirror Polish 

4" Turn Out, 36" Mirror Polished T304 Stainless Steel Stack (1 pc)

Give your truck the diesel drag racer’s edge with these T304 stainless steel stacks guaranteed to never rust. For anyone concerned about water build up in your pipes. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.

Fits all SMOKERS™ systems.

Pro Series
Part #:  B1430          

Chev/GMC 1 pc Universal Stack 4"Turn Out, 48"Mirror Polish

Pro Series

T304 Stainless Steel Stack (1 pc)

Give your truck the diesel drag racer’s edge with these T304 stainless steel stacks guaranteed to never rust. These extra tall pipes will give your pick up a real big rig look. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.
Fits all SMOKERS™ systems.

Part #:  B1440 

Chev/GMC Univ. 6"Angle Cut, 36"Black Finish Alum.Stack

Installer Series

Chev/GMC Univ.5"Angle Cut, 36" Blk.Finish Alum.Stack (1 pc)

Installer Series

Give your truck the diesel drag racer’s edge with these Black Aluminized stacks. These pipes look great in pairs on a dual SMOKERS™ system. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.
Fits all SMOKERS™ systems.

Part #:  B1530BLK    

Chev/GMC Univ.1pc Stack 5"Angle Cut,Alum. 48"Black Finish

 Installer Series

Give your truck the diesel drag racer’s edge with these black aluminized stacks. With these extra tall pipes there is no question that they will see you coming. Precision cut and mirror polished to perfection, nothing shows off the power and performance of your ride better.

 
Fits all SMOKERS™ systems
Part #:  B1540BLK        

Chev/GMC Univ.All full SZ. Pickup Beds"T"Pipe Kit,SMOKERS™

XP Series

This kit makes conversion to a SMOKERS™ stack system as easy as it gets. 4" Mandrel bent tubing ensures optimal exhaust flow. This kit fits any 4" performance exhaust system (excluding diesel particulate filter equipped vehicles.) With the mounting kit specific to your vehicle and your choice of stacks (both purchased separately) you have everything you need for the hottest race style truck on the block.
Fits All Full Size Diesel Pick up Trucks (excluding diesel particulate filter equipped vehicles.)
 
Part #:  UT1001          

Chev/GMC Univ.All full SZ. Pickup Beds Single SMOKERS™ Kit

Chev/GMC 01-07  Stainless steel mounting kit with hardware
 

XP Series

Fits All Configurations.
 

Part #:  KT1004 

Chev/GMC Universal Full size Pickup "T" pipe kit

This kit makes conversion to a SMOKERS™ stack system as easy as it gets. 4" Mandrel bent tubing ensures optimal exhaust flow. This kit fits any 4" performance exhaust system (excluding diesel particulate filter equipped vehicles.) With the mounting kit specific to your vehicle and your choice of stacks (both purchased separately) you have everything you need for the hottest race style truck on the block.

Inst  Series
Fits All Full Size Diesel Pick up Trucks (excluding diesel particulate filter equipped vehicles.)
 
Part #:  UT2001      

Chev/GMC Univ. All full SZ Pickup Beds Single SMOKERS™Kit

Inst Series

GM 6.6L Duramax 2500-3500 '01-'07  4"Alum.Steel T/B Exhaust Kit

 4" Aluminized Steel Turbo Back Single Exhaust Kit, Tip Included

Part  # 83010

The all new Rapid Flow exhaust kits from Bully Dog Technologies incorporates the high flow 6” radius design with the anti-corrosion protection of aluminized steel. These kits are available for Dodge, Ford, and GM full sized diesel pickups. All kits also come with stainless steel tips to complete your exhaust.

GM 6.6L Duramax 2500-3500 '01-'05 4"Alum.Steel  Exhaust Kit

 4" Aluminized Steel Cat Back Single Exhaust Kit, Tip Included

Part # 83040

The all new Rapid Flow exhaust kits from Bully Dog Technologies incorporates the high flow 6” radius design with the anti-corrosion protection of aluminized steel. These kits are available for Dodge, Ford, and GM full sized diesel pickups. All kits also come with stainless steel tips to complete your exhaust.

GM 6.6L Duramax 2500-3500'01-'07 4" Alum.Steel T/B Dual Exhaust Kit

 4" Aluminized Steel Turbo Back Dual Exhaust Kit, Tip Included

 Part #  83222

The all new Rapid Flow exhaust kits from Bully Dog Technologies incorporates the high flow 6” radius design with the anti-corrosion protection of aluminized steel. These kits are available for Dodge, Ford, and GM full sized diesel pickups. All kits also come with stainless steel tips to complete your exhaust.

GM 6.6L Duramax 2500-3500 '01-'05 4"Alum.Steel Dual Exhaust Kit

 
4" Aluminized Steel Cat Back Dual Exhaust Kit, Tip Included

Part #  83240 

The all new Rapid Flow exhaust kits from Bully Dog Technologies incorporates the high flow 6” radius design with the anti-corrosion protection of aluminized steel. These kits are available for Dodge, Ford, and GM full sized diesel pickups. All kits also come with stainless steel tips to complete your exhaust.

GM 6.6L Duramax 2500-3500 '01-'07 5" Alum Steel T/B Single Exhaust

 
5" Aluminized Steel Turbo Back Single Exhaust Kit, Tip Included

Part  # 83410 

The all new Rapid Flow exhaust kits from Bully Dog Technologies incorporates the high flow 6” radius design with the anti-corrosion protection of aluminized steel. These kits are available for Dodge, Ford, and GM full sized diesel pickups. All kits also come with stainless steel tips to complete your exhaust.

GM Duramax AL 5" exhaust 04.5-06

Part #  183026

Bully Dog recommends using a 4” exhaust system for horsepower applications less than 450 hp, while the 5” systems are recommended between 450 to 550 horsepower applications, and our new 6” systems are recommended for trucks producing more than 550 hp

GM 04.5-05 Dmax Catback T304 SST

 
Part  # 183340

Bully Dog Technologies’ Rapid Flow Exhaust Systems are designed and built with absolute minimal degree angles on bends. This will create the most free flowing low back pressure system in the industry allowing the turbo to move air more freely, reducing exhaust temperatures. Dyno results have shown a 10-20hp gain in horsepower by simply switching from stock to a Rapid Flow Exhaust System. This will also lower exhaust temperatures by as much as 200 degrees depending on size upgrade and horsepower output

Silverline Diesel Stacks Version 8.0

Part # DSK004

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

Part # DSK004B
8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

Part # DSK005
8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

Part # DSK005B 
8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

 Part # DSK010

Silverline Diesel Stacks Version 8.0

 Part # DSK010B

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

Silverline Diesel Stacks Version 8.0

6"  Clamp
Part # DSK6CH

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

8" Clamp
Part # DSK8CH

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

5" Clamp
Part # DSK5CHB

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

6" Clamp
Part # DSK6CHB

8” Miter-Cut Exhaust Stacks
Available in Silverline Polished and Nickel-black Stainless Steel
6” Aussie and Miter-Cut Stacks  also available
All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately

Silverline Stack Components for Pickups

Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating.

Silverline Diesel Stacks Version 8.0

 Part #  DSK8CHB

8" Blk. Clamp

• 8” Miter-Cut Exhaust Stacks
• Available in Silverline Polished and Nickel-black Stainless Steel
• 6” Aussie and Miter-Cut Stacks  also available
• All Stacks are sold individually, with 5” inlets and 36” lengths
Stack Basses & mounting clamps sold separately
Silverline Stack Components for Pickups
Silverline Stack Components are designed to give that "Big Rig" look to your light Diesel Truck! Featuring a single inlet and dual outlet, the stack base is manufactured from  5" 409 stainless steel tubing and includes a unique internal splitter plate to ensure equal exhaust flow from both stacks. Speaking of stacks... Silverline Stacks offer the most choices in T304 stainless stack designs currently available! Choose from angle cut, straight cut or turn-out styles in two finish options - High Polished or our new Nickel-Black finish - a mirror bright, black smoke-like nickel coating

TURN DOWN TIP 4" ID, 5" OD 12" OVERALL

TRUCK TIPS

 Part #   TK5012TDB4

6" DOUBLE WALL SS STRAIGHT CUT BOLT-ON 12" TIP 5" ID

6" DOUBLE WALL BLACK CHROMED SS BOLT-ON 12" TIP 5" ID

TRUCK TIPS

 Part #   TK6012DWBC

6" DOUBLE WALL CHROMED SS STRAIGHT CUT BOLT-ON 12" TIP 5" ID

TRUCK TIPS

Part #   TK6012DWBCC

6" DOUBLE WALL CHROMED SS STRAIGHT CUT BOLT-ON 12" TIP 5" ID

 TRUCK TIPS 

Part #   TK6012DWBS

6" DOUBLE WALL CHROMED SS SLASH CUT BOLT-ON 12" TIP 5" ID 

TRUCK TIPS

Part #   TK6012DWBSCC

SS 6" BOLT-ON ROLLED EDGE SLANT CUT TIP, 5" ID/12" OVERALL

TRUCK TIPS

 Part #   TK6012SRB5

6" CHROMED SS SLASH ROLLED BOLT-ON 18" TIP 4" ID

TRUCK TIPS

Part #   TK6018SRBCC

3 1/2" SADDLE CLAMP

4" SADDLE CLAMP

UNIVERSAL COMPONENTS

 Part #  4C

5" SADDLE CLAMP

 
UNIVERSAL COMPONENTS

 
Part #  5C

UNIVERSAL ADAPTER KIT 3.5" ID, 4" ID, 6" OVERALL

 (includes 2 adapters and 4 clamps)

UNIVERSAL COMPONENTS

Part #  DCK1