| Power Fool2 Nitrous Kit |
 |
Power Fool2 Nitrous Kit
Part #: 6150100 Our Price: $1,255.50
 |
0PowerFool2
TS Performance introduces the first Dual Stage Computer Controlled Nitrous System. The PowerFool2 was designed especially for the diesel applications. All wiring and solenoids are self contained in 2 boxes and are equipped with all the necessary hardware and fittings.
System includes:
Computer Controlled Command Center.
Self Contained Solenoid Box.
Plug in Wiring Harness.
Weather Pack connectors.
Wide-Open Throttle Switch.
Braided Nylon Nitrous Lines and fittings.
2 Nitrous Nozzles.
2 Nitrous Jets.
10lb. Nitrous Bottle
Bottle Bracket.
The PowerFool 2 makes Nitrous simple and takes away the entire headache of wiring. This system can be installed in numerous places, so if you have your own idea on an application that you would like to use you can. The PowerFool2 has many different applications that can be applied, such as the placement and the locations of your nozzles and the amount of Nitrous you would like to spray. This application can be used even if you have NOT O-ringed your heads. If you have stock heads the amount of Nitrous being sprayed should be limited.
When using the Powerfool2 we recommend using a custom burned chip that will aid in gaining the best results.
CAUTION! This system has the capability of producing up to 300hp and should be used in accordance to your application. If you have never used Nitrous before because of the fear factor you can now enjoy the added power without the confusion and stress that usually accompanies this feared power enhancer. |
|
| Propane Kit 80 hp (adjustable) |
 |
Propane Kit 80 hp (adjustable)
Part #: 10800 Our Price: $722.49
|
| Our Bully Dog propane system includes everything except the tank. The system actuates off of boost and injects a high octane fuel for a slower, more complete burn. Built-in safety features include: toggle switch control in the cab, cleaner oil with less carbon build-up, and a liquid safety feature which runs anti-freeze through the regulator to prevent liquid from entering the system. |
|
| Remote Fill Kit |
 |
Remote Fill Kit
Part #: 10101 Our Price: $467.49
|
| 15 foot Remote Fill Kit |
|
|
|
|
|
|
|
| BD Diesel Injector Kit, Chevy/GMC 6.5T 1994-2000 |
 |
BD Diesel Injector Kit, Chevy/GMC 6.5T 1994-2000
Part #: 1040165 Our Price: $640.00
|
|
The 6.5 injector is referred to as a pintle style injector, which is commonly used in an engine with pre-combustion cylinders. The injector has a needle plunger that plugs off the spray hole when it is closed. Once the pump allows fluid flow to the particular cylinder, the high fuel pressure forces the pintle away from the hole seat and the fuel stream is injected through the pre-combustion chamber into the combustion chamber. This type of engine often runs dirtier than a direct injected engine and the injectors require replacing between 80-100 thousand miles.
We offer new high flow Bosch injectors for this application or new stock injectors as well.
BD Diesel Injector Kit, Chevy/GMC 6.5T 1994-2000
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Stanadyne Fuel Pump 6.5L LD & HD C/K, G, & P3 TRUCK & VAN* 1994, |
 |
Stanadyne Fuel Pump 6.5L LD & HD C/K, G, & P3 TRUCK & VAN* 1994,
Part #: DS4831-5067 Our Price: $1,150.00
|
| Stanadyne Fuel Pump 6.5L LD & HD C/K, G, & P3 TRUCK & VAN* 1994,96 |
|
|
|
|
|
|
|
|
|
|
|
|
|
