Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

AEM Brute Force Intake System

Fits:

04-06 Ford F Series Super Duty Diesel
04-06 Ford Excursion Diesel

AEM (Advanced Engine Management) is proud to release its Workhorse HD intakes for diesel applications with a massive DRYFLOW filter element! AEM Workhorse HD intakes are available for popular late model Cummins, Duramax and PowerStroke Diesel engines. We engineer our Workhorse intakes to deliver maximum flow, filtration and durability for heavy duty applications and they even outperform the company's BRUTE FORCE intakes for these vehicles in both dust holding capacity and filter flow.

AEM's reusable DRYFLOW air filter for its Diesel applications is engineered to allow for longer service life and higher efficiency for maximum performance in between servicing (more DRYFLOW key features are below). Compared to the standard 9" Brute Force Dryflow Filter, the Workhorse Dryflow filter features over twice the surface area of filter media and utilizes deep, bull-nosed pleats to improve dust holding capacity and increase intervals between cleanings. The DRYFLOW does not use oil to trap dirt, which eliminates any chance of overoiling the filter element, takes the guesswork out of servicing your filter and dramatically reduces filter cleaning time.

AEM manufactures its intakes from mandrel-bent, lightweight aircraft aluminum with high-strength dogbone brackets and dual rubber soft mounts for maximum durability, and includes a "bullet-proof" heat shield with a powdercoated black finish, a complete hardware kit and comprehensive photo installation instructions. Workhorse HD intakes are available with a silver powdercoat or mirror-polished finish.

RFI Cleaning Kit

Use the Rapid Flow Cleaner to keep your induction filter clean and then use the oil and prefilter to keep it that way.

Vehicle Years: 2003-2004
Models: Pickup - power Stroke 6.0L
Box Dimensions: 9 X 11 X 17"

Replacement Filter:

• 14-10093 (Standard)
• 71-10093 (Pro-guard7)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

STAGE 2 COLD AIR INTAKE -- Up To 50 Horsepower Increase, Easy To Install In Less Than 45 Minutes, A Great All Around Air Intake System, Unique Isolated Design Blocks Engine Heat From Air Filter, Replaces Factory Air Filter And Air Box, Increases Air Intake Velocity For Improved Air Flow And Torque Allowing Quicker Acceleration And Better Performance, Includes A Standard Media Air Filter For Improved Air Flow And Torque For Better Performance, Radial Universal Cone Filter And Heat Shield, Durable And Corrosion Resistant Components

Engine - Fits

6.0L Diesel - F250 3/4 Ton, Super Duty

6.0L Diesel - F350 1 Ton, Super Duty

Stage 2 Cold Air Intake System Type XP

Magnum FORCE intake kits from aFe give your vehicle the air it needs by replacing the restrictive factory intake system with a high flow conical air filter, and providing isolation from the hot engine air. There are two types of magnum FORCE intake kits: Stage One, and Stage Two. Stage One kits replace the factory air box with a housing and conical filter assembly, and may include a heat shield. Stage Two kits replace the entire intake tract all the way back to the Turbo or intake manifold, providing the ultimate level of fresh, clean, cool air to boost your performance.

Engine models this part is compatible with:

• Ford 6.0L Powerstroke 03-07

STAGE 1, MAGNUM FORCE, COLD AIR INTAKE REPLACEMENT FILTER -- Direct Fit Filter Restores The Flow Of Your Cold Air Intake

Engine - Fits

V8, 6.0L, Turbo Diesel - Excursion

V8, 6.0L, Turbo Diesel - F250, 3/4 Ton

V8, 6.0L, Turbo Diesel - F350, 1 Ton

HIGH PERFORMANCE REPLACEMENT AIR FILTER -- Increased Filter Area For Greater Flow And Filtration Capacity, Makes More Power And Improves Gas Mileage, Reusable Filter Can Be Re-Cleaned, Perfect Direct Replacement Fit, Works Better Than Paper Or Foam Filters, Pre-Oiled Filter Won't Damage Engine Sensors, Tight Seal Without Gaskets Or Sealants, Withstands Extreme Engine Temperatures For Extended-Service Life, Manufacturers' Million Mile Warranty

Engine - Fits V8, 6.0L, Turbo Diesel - Excursion

 03-07 Ford Power Stroke Intake System 6.0L Diesel

Description:

Ford Trucks (03-07) V8-6.0L (td) Stg 2 Cx

Stage 2 Cold Air Intake System Type Cx

RFI Cold Air Intake Enclosed System

03-04 06-07 Ford 6.0L Powerstroke

The RFI is an advanced airflow induction built to increase the engine�s ability to breath. By replacing the restrictive stock induction, RFI increases horsepower, torque, fuel efficiency, and decreases exhaust gas temperatures.

By removing the stock air box, replacing it with a metal heat shield, and using a conical air filter you can maximize the air filter cleaning area and allow the engine to breathe easier and produce more horsepower. All RFI inductions use a lifetime reusable 4� layer cotton gauze filter. This design, combined with deep pleats, make these filters ideal for high performance use.

Intake systems are designed to seal tightly against cold air sources from within the engine bay, keeping hot air out of the system which ensures an improvement in performance and efficiency.

These intakes also works very well in conjunction with performance computer modules. The modules will increase the amount of fuel going into the motor and will therefore increase the need for more air. The installation of this system is very easy and requires only very basic hand tools. Installation can generally be done in 20 minutes or less.

Cold Air Intake Enclosed System

05 Ford 6.0L Powerstroke RFI

The RFI is an advanced airflow induction built to increase the engine�s ability to breath. By replacing the restrictive stock induction, RFI increases horsepower, torque, fuel efficiency, and decreases exhaust gas temperatures.

By removing the stock air box, replacing it with a metal heat shield, and using a conical air filter you can maximize the air filter cleaning area and allow the engine to breathe easier and produce more horsepower. All RFI inductions use a lifetime reusable 4� layer cotton gauze filter. This design, combined with deep pleats, make these filters ideal for high performance use.

Intake systems are designed to seal tightly against cold air sources from within the engine bay, keeping hot air out of the system which ensures an improvement in performance and efficiency.

These intakes also works very well in conjunction with performance computer modules. The modules will increase the amount of fuel going into the motor and will therefore increase the need for more air. The installation of this system is very easy and requires only very basic hand tools. Installation can generally be done in 20 minutes or less.

AEM Brute Force Intake System

Fits: