Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

RFI Cleaning Kit

Use the Rapid Flow Cleaner to keep your induction filter clean and then use the oil and prefilter to keep it that way.

Vehicle Years: 1994-2002
Models: Cummins - Pickup 5.9L
Airflow Increase: 820 CFM vs 377 CFM for stock @1.5" Water
Dyno Results: 24 Hp Over Stock
Box Dimensions: 17 X 19 X 13"

Replacement Filter

• :24-90010 (Standard)
• 24-91002 (Mega Cannon Top)
• 72-90010 (Pro-Guard7)

Pre-filters:

• 28-10031 (Gold)
• 28-10032 (Red)
• 28-10033 (Black)
• 28-10034 (Blue)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

The Pro-GUARD 7 magnum FORCE intake kit. This filtration technology represents the most dramatic advancement in filtration technology in the last 30 years. Using state of the art technology, the Pro-GUARD 7 product line offers high air flow, long service intervals, and a high level of protection for your engine.

Intake Hoses and Clamps

Are your intercooler boots & hoses blowing off? This is a common problem with the Diesel especially for those who love high boost pressure. Stock intercooler boots & hoses have been blowing off at as little as 25 PSI which can ruin your day if you are racing at the track or pulling that steep grade.

Now available from BD, Silicone Nomex intercooler boots & hoses that can hold up to 75 PSI and high torque t-bar clamps for a tight fit.

Vehicle Years: 1999-2002
Models: Cummins - Pickup 5.9L td
Box Dimensions: 18 X 16 X 12"

Replacement Filter: 24-91026 (Standard)

Cleaning Kit:

• 90-50001 (Aerosol)
• 90-50501 (Squeeze)

Fits: 94-02 Dodge Ram Diesel

5.9L Cummins

Product Style: AEM Brute Force Intake System
Color: Polished
Replacement Filter: 21-2059DK

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

Features:

• The AEM Brute Force Air Intake System is custom-designed and tuned for your specific truck or SUV large displacement engine
• The Brute Force is crafted in the USA
• CNC Mandrel-bent 6061 aluminum tubing guarantees the Brute Force has optimum flow
• The AEM Brute Force Air Intake System is equipped with the innovative Dryflow oil-free air filter
• TIG-welded fitting and brackets gives the Brute Force Air Intake System maximum durability
• Carbon black powder-coated steel heat shield included (when applicable)
• The Brute Force System includes the renowned AEM Power Spacer (when applicable)
• The one-piece, four-layer cotton gauze AEM filter with urethane body delivers excellent filtration for the life of your vehicle
• The Brute Force is legal in all 50 states and is C.A.R.B. exempt (or pending C.A.R.B exemption)
• Easy to install with included soft-mount installation kit and comprehensive instructions
• Your AEM Brute Force Air Intake System is backed by a Lifetime Warranty

94-02 Dodge Ram Diesel

AEM (Advanced Engine Management) is proud to release its Workhorse HD intakes for diesel applications with a massive DRYFLOW filter element! AEM Workhorse HD intakes are available for popular late model Cummins, Duramax and PowerStroke Diesel engines. We engineer our Workhorse intakes to deliver maximum flow, filtration and durability for heavy duty applications and they even outperform the company's BRUTE FORCE intakes for these vehicles in both dust holding capacity and filter flow.

AEM's reusable DRYFLOW air filter for its Diesel applications is engineered to allow for longer service life and higher efficiency for maximum performance in between servicing (more DRYFLOW key features are below). Compared to the standard 9" Brute Force Dryflow Filter, the Workhorse Dryflow filter features over twice the surface area of filter media and utilizes deep, bull-nosed pleats to improve dust holding capacity and increase intervals between cleanings. The DRYFLOW does not use oil to trap dirt, which eliminates any chance of overoiling the filter element, takes the guesswork out of servicing your filter and dramatically reduces filter cleaning time.

AEM manufactures its intakes from mandrel-bent, lightweight aircraft aluminum with high-strength dogbone brackets and dual rubber soft mounts for maximum durability, and includes a "bullet-proof" heat shield with a powdercoated black finish, a complete hardware kit and comprehensive photo installation instructions. Workhorse HD intakes are available with a silver powdercoat or mirror-polished finish.

Cold AirIntake Enclosed System

Dodge RFI Intake 94-02

The RFI is an advanced airflow induction built to increase the engine�s ability to breath. By replacing the restrictive stock induction, RFI increases horsepower, torque, fuel efficiency, and decreases exhaust gas temperatures.

By removing the stock air box, replacing it with a metal heat shield, and using a conical air filter you can maximize the air filter cleaning area and allow the engine to breathe easier and produce more horsepower. All RFI inductions use a lifetime reusable 4� layer cotton gauze filter. This design, combined with deep pleats, make these filters ideal for high performance use.

Intake systems are designed to seal tightly against cold air sources from within the engine bay, keeping hot air out of the system which ensures an improvement in performance and efficiency.

These intakes also works very well in conjunction with performance computer modules. The modules will increase the amount of fuel going into the motor and will therefore increase the need for more air. The installation of this system is very easy and requires only very basic hand tools. Installation can generally be done in 20 minutes or less.

Prefilter, for Cone filters included in RFI kit

Fits: 94-02 Dodge Ram Diesel

5.9L Cummins

Product Style: AEM Brute Force Intake System
Color: Gunmetal Gray

Replacement Filter: 21-2059DK

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

Features:

• The AEM Brute Force Air Intake System is custom-designed and tuned for your specific truck or SUV large displacement engine
• The Brute Force is crafted in the USA
• CNC Mandrel-bent 6061 aluminum tubing guarantees the Brute Force has optimum flow
• The AEM Brute Force Air Intake System is equipped with the innovative Dryflow oil-free air filter
• TIG-welded fitting and brackets gives the Brute Force Air Intake System maximum durability
• Carbon black powder-coated steel heat shield included (when applicable)
• The Brute Force System includes the renowned AEM Power Spacer (when applicable)
• The one-piece, four-layer cotton gauze AEM filter with urethane body delivers excellent filtration for the life of your vehicle
• The Brute Force is legal in all 50 states and is C.A.R.B. exempt (or pending C.A.R.B exemption)
• Easy to install with included soft-mount installation kit and comprehensive instructions
• Your AEM Brute Force Air Intake System is backed by a Lifetime Warranty